ATTN: Ms. Yolanda Hu
Mobile: 0086 18817752376
GENYOND MACHINERY INDUSTRIRAL GROUP LIMITED
Address:No.1328 Hengnan Road, Pujiang Town, Minhang, Shanghai, China
800kg-1000kg/H multi- fruit juice production line
(fruits are: Mango, pineapple, orange, grape)
Production Line Performance
Raw materialFresh fruit:Mango, pineapple, orange, grape
Processing capacity800kg-1000kg/H
End productionFruit juice
Packing methodTo be confirmed
Packing volumeTo be confirmed
II. Supporting facilities
a. Re-circulating cooling water dosage: it is estimated to use the 5-8 tons of the cooling water depends on the actual processing capacity
b. Source of the Re-circulating cooling water: running water
c. Water drainage facility: the workshop should be equipped with enough floor drain device
d. Total power consumption: less than 800 KW
e. Power supply: three phase 380 V 50 HZ
f. It will need about 5-12 persons for the whole project, including the packing.
g. Plant / factory area: about 600 square meter for the machine workshop, the height: more than 5 meters.
Brush Washer Qty:1set
A.Power:0.75Kw 380V,50Hz;
B.Outline:2500×800×1000mm;
C.Working principle: this machine by artificial or ascend the material, Material into the machine after the brush stick between scrub, material use brush rotation, forward, spray pipe to material of the dust of the world and dust to wash, if will brush the rod hair silk diameter overstriking, can be the material the thorn brushing, material of mud and thorn in under the action of water pressure, the product tank discharge.
D. Materials:SUS304
Feed pump Qty:2set
A. Power:1.5Kw 380V,50Hz;
B.Outline:1600×420×370mm;
C.Working principle: when the motor to drive the pump rotation, screw on the one hand around the axis of the rotating itself, on the other hand it along the bushing inside
surface rolling, hence forming pump seal chamber, screw turn every week, seal cavity of fluid forward a pitch, with screw continuous rotation, liquid to spiral form from a seal cavity pressure to another seal cavity, and finally extrusion pump body;
D.Material: the equipment and material contact part of the material for SUS304 and four fluorine seals made of.
Syrup melting tank Qty:1set
A.Outline:¢1000×750mm;
B. Working principle: This machine is used for melting, disinfecting, heating, heating, precooking, preparation, and concentrating of the material in the food processing by steam, wine production, pharmacy and daily chemical industry
De- Pulper Qty:1set
A.Power:15Kw 380V,50Hz;
B.Outline:1900×1400×1700mm;
C.Working principle: motor through the belt drive, make installed in flower,The key
of rotor high-speed rotation, fruit by feed port into the machines, feed the blades will
material screw conveyor to beating bar, in beating bar, under the action of the material
being pound. Due to the existence of the centrifugal force, and the material of the
juice and succulent (has become a slurry), through the screen on the screen hole
into the next word beating (screen hole according to the fruit of the size of the
nuclear and decide), nuclear the slag blade row to taphole, so as to realize automatic
separation of slag slurry;
D.Materials:SUS304
Vacuum degasser Qty:1set
A. Power:2.2KW,380V,50HZ;
B.Outline:1200×850×1800mm
C. Working principle : vacuum degasser all and fruit and vegetable juice contact parts for
high quality polished stainless steel materials and edible rubber, TQ type is mainly
composed of machine body, head, nozzle, valve, apparent holes, deflation, vacuum
pump, gas separator, etc.
ATTN: Ms. Yolanda Hu
Mobile: 0086 18817752376
GENYOND MACHINERY INDUSTRIRAL GROUP LIMITED
Address:No.1328 Hengnan Road, Pujiang Town, Minhang, Shanghai, China
Audited Supplier 
){kind=link}
){kind=link}